AmbroseOhisIkosimi Pubblicato: 4 Settembre 2011 Segnalazione Share Pubblicato: 4 Settembre 2011 I dont want to ask for too much. After fixing my firmware my nokia 97 mini buttons are misplaced. When i press ! I get ' ? For à and so on. Pls what will i do Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 4 Settembre 2011 Segnalazione Share Pubblicato: 4 Settembre 2011 you flashed firmware with different language and characer set. flash the one you had before (not version, but variant) Link to comment Condividi su altri siti More sharing options...
DonDaveAgboola Pubblicato: 5 Settembre 2011 Segnalazione Share Pubblicato: 5 Settembre 2011 (modificato) please can someone help me out. my nokia n97 wont refurbish. it keeps showing product code not found.this is the message i get during flashing with phoenix this is the error message i get "neither DP1.0 nor DP2.0 was found for the product, or the product cannot be identified" but can reset the software (i.e. flashing it) using the multi flash. i think my case is like that of Ambrose. i use 64 bits OS. please Socio, Roger, somebody in the house, what do i do? i followed all the procedures carefully. pls help. besides, how can i insert the patcher.ldd in the uda file using nokia cooker. thnks i have been able to hack my phone in the long run. thanks to all of you in this bam forum!. You are all doing well. Modificato 5 Settembre 2011 da DonDaveAgboola Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 5 Settembre 2011 Segnalazione Share Pubblicato: 5 Settembre 2011 hacked UDA file can be already found on FWromky.4shared.com if yiu have hacked your phone yet, can you describe what was the issue, and the solution that hleped? maybe will help to some more people here Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 6 Settembre 2011 Segnalazione Share Pubblicato: 6 Settembre 2011 can we hack nokia E-7 ?? i found 2 variant of same product code in navifirm..what to do??i cant remove battery to see code... Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 6 Settembre 2011 Segnalazione Share Pubblicato: 6 Settembre 2011 you do not have to flash same variant... you can read variant number via phoenix or JAF even, so that is not the problem. but... just download any variant that contains your language. Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 6 Settembre 2011 Segnalazione Share Pubblicato: 6 Settembre 2011 how to know which variant is of my language?? both are written in english and wn i choose either of the variants...in the last column some files change Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 6 Settembre 2011 Segnalazione Share Pubblicato: 6 Settembre 2011 while flashig should we keep mobile on or off? Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 7 Settembre 2011 Segnalazione Share Pubblicato: 7 Settembre 2011 download any of them, it does not matters. really. phone should be on, connected via PC SUITE mode. Link to comment Condividi su altri siti More sharing options...
Gagome Pubblicato: 7 Settembre 2011 Segnalazione Share Pubblicato: 7 Settembre 2011 Hi, When I install Phoenix (2011.14.004.45945) I get an alert from my Antivirus SW about a Trojan? And the install fails because the AV SW has removed the file crack.exe. Of course, I can disable my Antivirus SW but is this malware/virus free? I am a little bit worried. Thanks. Regards, Gagome Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 7 Settembre 2011 Segnalazione Share Pubblicato: 7 Settembre 2011 Don't worry. it's warning you because this phoenix is cracked. disable AV and install. Link to comment Condividi su altri siti More sharing options...
tintinmany Pubblicato: 8 Settembre 2011 Segnalazione Share Pubblicato: 8 Settembre 2011 hi.... Please i'm gettin this error message when i click on the three dot tab in firmware update(phoenix) "neither DP1.0 nor DP2.0 was found for the product, or the product cannot be identified" how to i solve the error message Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 8 Settembre 2011 Segnalazione Share Pubblicato: 8 Settembre 2011 rusnak i got all softwares but one question...when i stareted to download from navifirm it was showing uda file size 173 MB and when download completed it was 169 MB what to do???should i flash my mobile with that 169 MB file?? Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 8 Settembre 2011 Segnalazione Share Pubblicato: 8 Settembre 2011 @tintinmany: send me the path where you have firmware files. @drchintan79: this is not the problem. anyway, you need to use hacked UDA file e.g. from fwromky.4shared.com for exact model and version of FW Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 8 Settembre 2011 Segnalazione Share Pubblicato: 8 Settembre 2011 2 variants are there from the site su suggested my software version is 014.002..so i have downloaded RM-626_014.002_U08.01_79.92_prd.uda.rar ...is it ok?? custom version: 014.002.C03.01 and language is 014.002.41.01....is it ok....??????????? Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 8 Settembre 2011 Segnalazione Share Pubblicato: 8 Settembre 2011 i have flashed my phone but its not hacked...everything gone right....i installed rompatcher also now what to doo..??i m confused...while i open fompatcher...it says./SYS/PATCHER.LDD NOT FOUND Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 8 Settembre 2011 Segnalazione Share Pubblicato: 8 Settembre 2011 for E7, there is filebrowser (RND tools) and and installserver. you can install rompatcher (not lite). Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 8 Settembre 2011 Segnalazione Share Pubblicato: 8 Settembre 2011 bro i have hacked it without rompatcher...with the use of just hack it kit thxxx rusnak Link to comment Condividi su altri siti More sharing options...
copain Pubblicato: 9 Settembre 2011 Segnalazione Share Pubblicato: 9 Settembre 2011 (modificato) Hi whenever i try to open navifirm+ and download the package,always getting this error an error occurred when attempting to connect the update server [web exception] unexpected error occured on a receive I googled it and says it as the problem with nokia server,wait for 1 day.. But everyday its the same error here..Any solution??? Modificato 9 Settembre 2011 da copain Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 9 Settembre 2011 Segnalazione Share Pubblicato: 9 Settembre 2011 upper left, choose SERVER. not nokia care but PRODUCTION EXTERNAL Link to comment Condividi su altri siti More sharing options...
drchintan79 Pubblicato: 10 Settembre 2011 Segnalazione Share Pubblicato: 10 Settembre 2011 try and try for 3-4 times it will connect and error wont come....i had same problem with navifirm Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 10 Settembre 2011 Segnalazione Share Pubblicato: 10 Settembre 2011 have you tried to set PRODUCTION EXTERNAL?? Link to comment Condividi su altri siti More sharing options...
Badas34 Pubblicato: 10 Settembre 2011 Segnalazione Share Pubblicato: 10 Settembre 2011 6120c is not on the list Link to comment Condividi su altri siti More sharing options...
Rusnak-COBRA Pubblicato: 10 Settembre 2011 Segnalazione Share Pubblicato: 10 Settembre 2011 6120c is hackable with new certificate and helloox. there is no need to flash! Link to comment Condividi su altri siti More sharing options...
copain Pubblicato: 11 Settembre 2011 Segnalazione Share Pubblicato: 11 Settembre 2011 I followed your guide to hack my e52 v22 correctly but there were some problems and i couldnt hack it.. 1. the package download folder is different from what you said in the tutorial here it is 'C:\Documents and Settings\All Users\Application Data\Nokia\Packages',i serched it in google and found out that its changed in latest phoenix version.. 2.whenever i tried to open the product details(that 3 dot thing) nothing was seen in the window,again i googled it and found out that the package should be in the 'C:\Program Files\Nokia\Phoenix\Products folder' ,i copied the package from 'C:\Documents and Settings\All Users\Application Data\Nokia\Packages' folder to here and now it showed.. 3.I replaced the uda with the hacked one and when i tried to options of refurbish screen as explained in the tutorial,it showed the crc checksome error of file 'rm469_022.009_U000.000_prd.uda.fpsx'...So i replaced it with original file thinking that i will replace it again with hacked one just before flashing.. 4.when i clicked refurbish button nothing happens only flickering in log area..nothing flashing..No solution till now I googled about it in some other tutorials,procedure explained in a different manner.. When should i connect the phone during this entire procedure??In what state should i connect this(pc suite or switched off)?? In one tutorial i have seen that phone is connected in pc suite mode and 'no connection' option of phoenix is changed to usb1 and then clicked scan product...Can i try this??Why did we choose the 'no connection' option.. I am really confused please help me.. Link to comment Condividi su altri siti More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Accedi Ora