How To Hack Any Phone (Using Navifirm+, Phonenix, Rp+)

[Rusnak-COBRA]

hope this image from smartmobil.sk will help you.

you have to read original FW, then options, click on UDA, edit, take hacked file

[gurlove]

its not in english,. can you help me in english??

Modificato 12 Agosto 2011 da Rusnak-COBRA

[Rusnak-COBRA]

i told you already. let the ORIGINAL uda file in the firmware folder. manage everything to set phoenix. then click options, select the UDA file, click on EDIT, browse for hacked UDA, click OK and refubrish.

[gurlove]

ok thanx a lot, you are a hero sir, i got to know how to do with the help of picture you uploaded, really you helped me a lot,. thanks , thanks a lot,. now you mean a lot to me and this forum,. love iT!!!!!!!!!!

//EDIT:

now as i know now how to flash CFW files, can you help me in one more thing, i want best CFW file for my nokia n97. can you help me finding me the best one??

thanks a lot,

gurlove kambo.

Modificato 12 Agosto 2011 da Rusnak-COBRA

[Rusnak-COBRA]

i am not CFW lover and never had Nokia N97. this is topic only about hacking, to help people.

[gurlove]

ok thanx , u already helped me a lot sir, may god bless u always,

regards,

gurlove kambo

Modificato 12 Agosto 2011 da Rusnak-COBRA

[shanbhudz]

is this safe?how long take time to flash? i worried about this method, last time i get trouble when doing this...my phone get into a dead set...what compatible usb to do this?..im afraid totally to try this method...i know when it gets into trouble my phone gets bricked...any suggestion and idea?...thanks

[Rusnak-COBRA]

what suggestion? you need only some intelligence, USB cable and this guide. do not mess it up.

[stevieeb22uk]

@ shanbhudz, If you follow the tutorial exactly it'll work fine, I've now used this method on 3 Phones; 5800XM, E52 & N95. All Phones behave exactly as they did before flash, I would encourage anyone to give it a try, but to do so with caution. Even if you think you've 'bricked' it, you may find you can still reflash it anyway.

There's not much that can go wrong, the crucial thing is swapping the original uda file with the hacked one, they must have identical filenames i.e same firmware version.

Good Luck

[gsmwinkel]

Dear Forum i have a problem and hope someone can help me,

I have a nokia E51 and i flashed it with Phoenix to newer firmware old was RM-244 Release 200.34.36 and i choose variant E51 Tmobile NL (0557603). Everything was ok i changed it to RM-244 Release 200.34.36 Vodafone nl (0558179). I was trying to hack uda and add the ldd files but i coukdnt get it working. And from here my problem started i tried i Went to Nafifirm plus i went to Nokia E51 RM-244 and then i choose 410.34.1 (i have 200.34.36)i didnt know why i did that ok for so on and i choose variant rm-244 ctr euro-1grey steel 0566660. i went further and Refurbished/Flash with Phoenix.

And since then it wont start the phone i get black screen . I cant start the phone anymore. I dont know what to do its not working.

Phoenix:

If i start Phoenix and try to get the old Firmware back the "" RM-244 Release 200.34.36 and i choose variant E51 Tmobile NL (0557603) it says:

Everything goes ok but at the end it says: Asic CMT: Verifying communication to device...waiting for communication response

the Log:

Asic CMT: Partitioning area 1...

Asic CMT: Erasing rm244_2003436_prod.v221_20

Asic CMT: Erasing area 1...

Asic CMT: Erasing rm244_2003436_00.221U

Asic CMT: Programming rm244_2003436_prd.c00

Asic CMT: Programming 0%

Asic CMT: Programming 2%

Asic CMT: Programming 4%

Asic CMT: Programming 6%

Asic CMT: Programming 8%

Asic CMT: Programming 10%

Asic CMT: Programming 12%

Asic CMT: Programming 14%

Asic CMT: Programming 16%

Asic CMT: Programming 18%

Asic CMT: Programming 20%

Asic CMT: Programming 22%

Asic CMT: Programming 24%

Asic CMT: Programming 26%

Asic CMT: Programming 28%

Asic CMT: Programming 30%

Asic CMT: Programming 32%

Asic CMT: Programming 34%

Asic CMT: Programming 36%

Asic CMT: Programming 38%

Asic CMT: Programming 40%

Asic CMT: Programming 42%

Asic CMT: Programming 44%

Asic CMT: Programming 46%

Asic CMT: Programming 48%

Asic CMT: Programming 50%

Asic CMT: Programming 52%

Asic CMT: Programming 54%

Asic CMT: Programming 56%

Asic CMT: Programming 58%

Asic CMT: Programming 60%

Asic CMT: Programming 62%

Asic CMT: Programming 64%

Asic CMT: Programming 66%

Asic CMT: Programming rm244_2003436_prod.v221_20

Asic CMT: Programming 68%

Asic CMT: Programming 70%

Asic CMT: Programming 72%

Asic CMT: Programming 74%

Asic CMT: Programming 76%

Asic CMT: Programming 78%

Asic CMT: Programming 80%

Asic CMT: Programming 82%

Asic CMT: Programming 84%

Asic CMT: Programming 86%

Asic CMT: Programming 88%

Asic CMT: Programming 90%

Asic CMT: Programming 92%

Asic CMT: Programming 94%

Asic CMT: Programming rm244_2003436_00.221U

Asic CMT: Programming 96%

Asic CMT: Programming 98%

Asic CMT: Programming 100%

Finished Flashing

Rebooting to RFS Mode

Asic CMT: Verifying communication to device...

Waiting for communication response: 25

Waiting for communication response: 24

Waiting for communication response: 23

Waiting for communication response: 22

Waiting for communication response: 21

Waiting for communication response: 20

Waiting for communication response: 19

Waiting for communication response: 18

Waiting for communication response: 17

Waiting for communication response: 16

Waiting for communication response: 15

Waiting for communication response: 14

Waiting for communication response: 13

Waiting for communication response: 12

Waiting for communication response: 11

Waiting for communication response: 10

Waiting for communication response: 9

Waiting for communication response: 8

Waiting for communication response: 7

Waiting for communication response: 6

Waiting for communication response: 5

Waiting for communication response: 4

Waiting for communication response: 3

Waiting for communication response: 2

Waiting for communication response: 1

Starting to recover the phone

Recovering phone

Error 0x8401F121 communicating to phone. Unable to verify comm.

Initializing

Warning: Unable to communicate to product after flashing

Scanning image files...

Unable to set the phone to flash mode. Unable to flash.

All operations completed

Product flashing aborted

Please can someone help me PLEASE im trying this for 3 days? What is my problem ? I also tried ith JAF software

JAF version 1.98.62

Detected PKEY: 90009699

Card life counter: 99.99%

P-key nokia module version 01.02

FBUS INTERFACE NOT CONNECTED!!!

USB Cable Driver version: 7.1.45.0

Changing mode...Done!

FILES SET FOR FLASHING:

MCU Flash file: NONE

PPM Flash file: NONE

CNT Flash file: NONE

APE Variant file: NONE

Searching for JAF saved location of ini...

Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-244\

Searching for default location of ini...

Checking path: C:\Program Files\Common Files\Nokia\DataPackage\\Products\RM-244\

Searching for JAF saved location of ini...

Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-244\

Scanning ini files...

Searching for default location of ini...

Checking path: C:\Program Files\Common Files\Nokia\DataPackage\\Products\RM-244\

Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-244\

FILES SET FOR FLASHING:

MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prd.c00

PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prod.v221_20

CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_00.221U

APE Variant file: NONE

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

Phone Type:

FILES SET FOR FLASHING:

MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prd.c00

PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prod.v221_20

CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_00.221U

APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_00.221U

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

PRESS POWER ON NOW!

Searching for phone...Found

Sending RAW loader...

Using 006.044.048

Elf2flash 07.11.000 test 3

CMT RAW loader...

Patching RAW boot step1...

Patching RAW boot step2...

Patching RAW boot step3...

Sending RAW Loader...

....................Loader Sent!

Stage 2 starting............Phone prepared OK!

Waiting for the phone to boot...

Searching for phone...

Status byte: 0600

Selecting CMT flash...Result: 0000

Phone is in flash mode...

CMT blocks: 609, APE blocks: 0

Erasing cmt...

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prd.c00...

Erasing cmt zone 00040000 - 007FFFFF ... Erase result: 0000

Erasing cmt zone 00A00000 - 068FFFFF ... Erase result: 0000

Partition result: 0014

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prod.v221_20...

Erasing cmt zone 04A00000 - 068FFFFF ... Erase result: 0000

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_00.221U...

Partition result: 0014

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_00.221U...

Partition result: 0014

Send CMT CFG...

Writing cmt...

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prd.c00...

Sending CMT HASH for ADA

Sending CMT HASH for KEYS

Sending CMT HASH for PRIMAPP

Sending CMT HASH for RAP3NAND

Sending CMT HASH for PASUBTOC

cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected

cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...

Sending CMT HASH for SOS*UPDAPP

Sending CMT HASH for SOS*DSP0

Sending CMT HASH for SOS*ISASW

Sending CMT HASH for SOS*CORE

Sending CMT HASH for SOS+ROFS

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_prod.v221_20...

Sending CMT HASH for SOS+ROFX

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_00.221U...

Processing C:\Program Files\Nokia\Phoenix\Products\RM-244\rm244_2003436_00.221U...

Rebooting...

Finishing CMT session...

Restarting CMT...

Pooling phone...

Phone not found...

Second try...

Phone not found...

Done!

Please someone HELP

[Rusnak-COBRA]

dude, it's because you killed the phone...

i recommend everyone not to UPGRADE software by simple flashing. and it's also impossible to DOWNGRADE FW version.

So, now, use FW410 (hacked uda is on fwE51.4shared.com) get it to navifirm, use DEAD USB mode and flash the devices. after that it should be OK

[gsmwinkel]

THANK you very much for your quick answer respect my friend but i have a question what do you mean with hacked uda on 4shared ? Im sorry i dont understand that. Thank you

[gsmwinkel]

Sorry i dont understand what you mean? What do i have to do must i download from navifirm plus the firmware? Can you please tell me wich one i must download? Im from Netherlands/Holland.

Uploaded with ImageShack.us

Hope that you can help me.

[Rusnak-COBRA]

you can download the same as you have product code on phone (under battery) or any of them that suits to your language.

as the FW410 is not hackable, i offered you modded part (the pre hacked UDA file) that can be downloaded on fwE51.4shared.com

[merlita07]

help how to open nokia cooker it says too old please download new version wahhh ive download it from the link provided at first page and when flashing should i turn off the phone first?

Modificato 16 Agosto 2011 da merlita07

[Rusnak-COBRA]

nokia cooker: just set the date back, for example to june

flashing phone: if flashing via JAF as deda phone, then turned off. if via phoenix, then must be turned on, connected via PC Suite mode.

[gsmwinkel]

Dear Rusnak cobra,

I really dont understand it? PLease what do you mean with fwe51.4shared?? I cant find it when i go to www.fwe51.4shared.com it says error nothing found please can you give me the download link. Or tell me what you mean. I just want to get the phone started first dont need to hack it direct now i first want to start the pfone normal THANKS FOR YOUR HELP!!!!!!!Really apreciate it

[Rusnak-COBRA]

if you do not need hack, just flash soft from navifirm.

if you want my modded UDA file, just type fwe51.4shared.com into web browser. do not use any WWW.

[gsmwinkel]

Rusnak CObra thank you very much !!!!!!!!!! RESPECT ITS WORKING.

Now the phone is working now i tried to use your hacked uda. Wich i donwloaded from fwe51.4shared (without www. ) Thanks. When i downloaded that hacked uda and open it with cooker i see that there is missing one patcherS3.ldd is this normal? Let me know please. Look picture what i mean please.

WHat i did is i just used your hacked uda i placed it in the map with the firmare the map rm-244 it said replace other uda because it had same name i put yes replace and copy. THen i flashed it with Phoenix. Everything was ok.

Then i downloaden rompatcher plus lite and installed and opened it. Then i see Install server RP+ that one is RED and the other one open4all RP+ is green. Now i wanted to know how to get that one also green? Do i have to get the origibal uda and then paste the ldd 3 files in it (cooker and save it). What is my problem now its red and not both green.

I used this navifirm produkt

RESPECT !!!!!!!!!!!!!!!!!!!!!!!!! AND thanks i thaught my phone is dead.

[Rusnak-COBRA]

LDDS3 is for Symbian^3

this ROM is older, done before RP+3 was released. in ROM was already ehole RP+ (i think 2.3?) and also installserver.exe for installing usigned apps without patch. so you do not need installerver patch, only open4all

enjoy.

[gsmwinkel]

Hello I waited for you

So you mean that the installserver RP+(Rompatcher) is red can stay red is that right please confirm me? And only need open4allRP+ can you please confirm. How can i test if my phone if its hacked? Do you have something for me to download so i can check it. And can send you an private message i want to ask you something.

[Rusnak-COBRA]

you can ak me here...

your phone is hacked if you can access the C:\SYS\BIN folder and also install unsigned applications

[gsmwinkel]

I have baught a year ago a simple software spy generator from ebay wich can create spy files.

Need .cer and .key to sign .sis file to sign application.

This is how it works

What i did is i put imei in box and choose a .cert and a.key and then i click generate and then it comes the software in a map it comes xxxx.sis. Now my problem is that i always applied on opda for cer and key and then use it in the program to create the files.

But now i cant reach opda i come here and applied for devcert for the imei, and that i use in the programme there comes out a .sis file. But i cant install it on the phone because its contrained. I thaught i hack the phone but im still unable to install it on the phone. Do you have maybe a solution for me? And must it be possible to hack the phone then use devcert in programme and then use the .sis file that comes out and install it on the phone will that work?? Please if you help me with my problem im able to send you the spy generator for free.

Here is a link of the one i mean. ill send u for free if u help me please. I dont know if my phone is hacked if that the problem is or the devcert wich i fill in the spy generator to create the file?

[gsmwinkel]

Sorry for my bad English

[Rusnak-COBRA]

do not use CER and KEY, or better, unsign that file, and then it will work to install. with this new certificate it will never work. just let it unsigned.