Jump to content
Nokioteca Forum

Mcfixerv1-0-beta[free]


giangio1986
 Share

Recommended Posts

XX___1.png6SC_2___89.jpeg6SC_2___832.jpg

What is MCFixer? well quite simply if you have ever managed to corrupt your MMC,

Format it NTFS/FAT32. You will find that the N-Gage just refuses to work with it.

This Symbian (.sis) app sits in your phones user memory (only 31k), should you run into problems

with your MMC, it is capable to rebuilding the entire partition table/Formatting it at a speed

that would make even Nokia envious.

Please Remember this is BETA software, so it could still contain a few bugs.

Make sure you read the instructions before you use it.

This software is developed and distributed for free. It's only goal is to help other

Nokia N-Gage users. Although it has passed some tests, by using the software you do so

at your own risk. In no event shall the author be responsible for any damages

whatsoever (for example, hardware and software damage, loss of data, or any other

pecuniary loss or any other real or consequential damages) arising out of the use or

inability to use this product. Please remember that this is a BETA version, which

needs more tests. After running the repairing routine it is expected that the

reported card size will be equal to it's original value, and it will be detected by

N-Gage USB conection, but all data stored on it will be lost!

---------------------------------------USAGE------------------------------------------

Following are described the steps needed to carry through the memory card recovery:

Warning: Read all the steps before starting the procedure.

1º - Make sure that there’s no important data in the card that have no backup of

which in another physical media, therefore the card will be completely erased.

2º - The MCFixer came in a .sis installation file that can be installed from the

N-Gage application manager. For such, is necessary that .sis installation file be

copied for the N-Gage (memory card or internal memory). Any of the common ways of

transmission can be used (ie. send by mail, Bluetooth, memory card...). After

installation the .sis file can be deleted if needed.

3º - IMPORTANT: The MCFixer must be installed in the device's INTERNAL MEMORY (not

in memory card). In the current version it occupies only 31Kb, then this should not be

a problem. Any way, make sure that there’s available space for the installation.

4º - After the MCFixer installation, the program can be accessed from the device's

menu. When the program is opened the current selected drive can be seen in the status

bar (E.g.: "Current drive: E:"). Make sure that the selected drive is the memory card.

In the case it it's not, the correct drive can be chosen from menu:

"Options->Select drive". In N-Gage, E: is usually the memory card drive.

5º - The card restore process is done by the Wizard in 4 steps:

1 - Find card's first sector.

2 - Find card's last sector.

3 - Write card's boot sector

4 - Format card.

To start the wizard, select the menu item: "Options->Fix MC Wizard->Start wizard"

The application have another options that are mere informative and they do not modify

the device or memory card, except the item: "Options->Format drive" that obviously

formats currently selected drive and erases all its data.

6º - To execute each wizard step, select the menu item:

"Options->Fix MC Wizard->Execute". To cancel the wizard execution select:

"Options->Fix MC Wizard->Cancel". The execution can be cancelled in any step of

wizard, however, steps 1 and 2 do not modify the card. In the other hand, after the

step 3 execution the card is already modified and is recommended that wizard is executed

until the end.

MCFixerv1_0_Beta____.zip

Modificato da giangio1986
Link to comment
Condividi su altri siti

le mie il pc manco le rileva

Dipende da un po' di cose. Se hai windows XP dovrebbe rilevartele. A meno che tu abbia un lettore MMC un po' vecchio che non è compatibile con le ultime RS-MMC DV. Infatti io ne avevo uno vecchio via USB che la MMC originale da 64MB della Nokia me la leggeva benissimo, ma la MMC nuova da 256 non me la leggeva. Ho risolto usano un'altro lettore PCMCIA che avevo per il palmare (che quindi ho inserito nel PC) e me la legge benissimo... b)

Link to comment
Condividi su altri siti

ragazzi xdonate il mio ot

scusate ma sto programma funziona solo con mmc?

xkè avrei una sd card di una digitale alcune foto si vedono sulla digitale ma portandole nel pc no

che dite potrebbe funzionare?

Magari il programma funziona anche con le SD (BOH!) ma essendo un programma per il nostro cellulare le SD purtroppo non si inseriscono nello SLOT che abbiamo nel telefono.. Quindi non penso che la tua cosa sia fattibile.... :sad01_anim:

Mi spiace...

AndRove 2k®

Link to comment
Condividi su altri siti

se si usa sul tel questo è ancora meno utile di mmc medic (che mi sembra non faccia poi così tanti miracoli) perchè la maggior parte delle volte la mmc non viene letta o blocca il cell

Sinceramente non l'ho provato perchè per adesso non mi serve (meno male...). Comunque lo screenshot non lascia dubbi... E' per cellulare....

AndRove 2k®

Link to comment
Condividi su altri siti

  • 6 mesi dopo...

Please sign in to comment

You will be able to leave a comment after signing in



Accedi Ora
 Share

×
×
  • Crea Nuovo...

Informazione Importante

Questo sito utilizza i cookie per analisi, contenuti personalizzati e pubblicità. Continuando la navigazione, accetti l'utilizzo dei cookie da parte nostra | Privacy Policy