Jump to content
Nokioteca Forum

[6630] Cuffie Modificate : Audio Da Favola


Recommended Posts

Si, infatti era quello che sospettavo... Nel mio autoradio ad esempio c'è un solo ingresso! Scusa la mia ignoranza, ma nell' auricolare nokia, quale dei due auricolari è anche stereo?? E se prendo un dispositivo che invece di separare il segnale audio (in dx e sx) me lo unisce?? Secondo te esiste??

tu devi prendere un jack stereo far entrare tutti e due fili nel jack e collegarli ai due poli

Link to comment
Condividi su altri siti

  • Risposte 159
  • Created
  • Ultima Risposta

Top Posters In This Topic

Scusate il ritardo nella risposta....

:blink: C'è da fare una distinzione per chi nn l'avesse capito...

io ho messo 2 RCA rca3lj.jpg perchè l'autoradio che avevo aveva quei connettori e perchè tutti gli amplificatori utilizzano l'entrata con gli rca

se hai un'entrata con un jack da 3,5 stereo jack3yv.jpg metti quello!!! il procedimento è pressochè identico devi solo unire i due poli negativi assieme e lasciare divisi i 2 canali dx e sx

Modificato da lupone
Link to comment
Condividi su altri siti

Ho montato il trasmettitore fm: con il 6630, su alcuni mp3 l'audio è accettabile, su altri l'audio è penoso: i fruscii sono moltissimi e diventano insopportabili!!!!

Come eliminare i fruscii???

L'elettrauato mi ha detto che l'ha montato su i-pod e va benissimo e il problema starà nel fatto che abbiamo collegato un telefonino!?!

Cosa sarà? Ho notato che se gli mp3 sono fatti con un audio "alto" in partenza, i fruscii diminuiscono, viceversa aumentano.

Aumentano aumentando il volume della radio.

Help!

p.s. Sarà il trasmettitore di troppo scarsa qualità?

In effetti ho speso solo 50€ tutto compreso...

Link to comment
Condividi su altri siti

nn saprei.....

magari apri un'altro 3d e fai la stessa domanda b)

-----------------------------------------------------------

edit:

nn avevo visto che lo hai già fatto hehehehe se ti va cancella la domanda qui cosi nn inzozziamo questo topic grazie

Modificato da lupone
Link to comment
Condividi su altri siti

  • 2 settimane dopo...

prima di tutto mi complimento per il lavoro..lo stavo per fare anche io ma poi ho trovato l'accessorio ad-46 a 20 euro e penso che mi prendero quello visto che ha anche il micvrofono..ho solo un problema..ho provato a smontare la mia autoradio..una pioneer 3590MP..dietro ho 4 uscite rca( dx e sx front e dx e sx retro)sul manuale mi dice che sono uscite ma collegando 2 rca di entrata con ad esempio il lettore cd collegato mi mischia i 2 suoni..sento sia l'audio della radio che quello del lettore cd collegato..se metto in pause si ferma solo l'udio della radio..se ci collego il telefono rischio di rovinare qualcosa perche sono uscite o no??

Link to comment
Condividi su altri siti

per l'entrata il manuale mi dice di usare il connettore IP-BUS per collegarci ad esempio il caricatore cd..ditre che devo collegarlo li?

in piu sempre nel manuale mi dice che se uso un cellulare devo collegarlo ad un filo che blocca in automatico l'audio quando arriva una chiamata..alla fine della fiera vorrei sapere come collegarlo.. allego anche lo schema della radio..

cosa uso? uscite rca? IP-BUS? filo per cellulare?

installazione_pioneer.pdf

Link to comment
Condividi su altri siti

  • 2 settimane dopo...
lupone sei un grande! appena letto questa discussione sono corso tutto esaltato in macchina per vedere se il mio autoradio aveva l'uscita aux, ma con mio grande disappunto ne ho constatato l'assenza! (PORCA PUTTANA TROIA!!!!!! b) ) ora ti chiedo: c'e' un altro qualsiasi modo per collegarlo? grazie

Se la tua autoradio ha il mangianastri (come la mia) puoi comprare l'adattatore con uscita jack stereo 3,5. Trattasi di una cassetta che al posto del nastro ha un codificatore di segnale ed un filo che esce e finisce con un jack stereo. Al jack ci puoi attaccare qualsiasi apparecchio che abbia l'uscita per cuffia. Per la modifica di Lupone basta mettere un jack stereo femmina invece dei due rca. b)

Link to comment
Condividi su altri siti

b)b)

salve ragazzi e scusate l'intrusione....

Il rumore o gli stacchi che sentite nell'impianto dipendono dall'impianto stesso, cioe' dall'ingresso aux dello stereo quindi dalla qualita dell'impianto stesso!

l'unico modo per eliminare questo difetto se cosii si puo' chiamare e' l'aggiunta sugli ingressi rca di un filtro che tecnicamente viene chiamato "SEPARATORE DI MASSA"! Con un costo contenuto risolverete alla grande il vostro problema!!CIRCA 7/8 EURO!

Prima di acquistarlo dovreste fare una verifiva pero',provare cioe' a collegare agli ingressi aux dell'impianto un altro apparato, come ad esempio un i-pod oppure un lettore cd portatile o altro ancora.....nel caso in cui sentite gli stessi rumori o stacchi vuol dire che il motivo di tali disturbi e' quello che vi ho detto....

RAGAZZI FATEMI SAPERE OK????

Link to comment
Condividi su altri siti

per l'entrata il manuale mi dice di usare il connettore IP-BUS per collegarci ad esempio il caricatore cd..ditre che devo collegarlo li?

in piu sempre nel manuale mi dice che se uso un cellulare devo collegarlo ad un filo che blocca in automatico l'audio quando arriva una chiamata..alla fine della fiera vorrei sapere come collegarlo.. allego anche lo schema della radio..

cosa uso? uscite rca? IP-BUS? filo per cellulare?

RAGAZZI PER CHI HA PROBLEMI A COLLEGARE I-POD O IL PROPRIO NOKIA SULLO STEREO DELLA MACCHINA MI CONTATTI NELLA MIA CASELLA E-MAIL E GLI DARO' TUTTE LE INFORMAZIONI CHE DISPONGO!!ESISTONO SOLUZIONI ANCHE PER STEREO ORIGINALI DELLE CASE DI AUTOMOBILI!!

Link to comment
Condividi su altri siti

Scusate la domanda, sono nuovo ed ho appena acquistato il nokia 6630.

La mia autoradio sul frontalino ha l'ingresso USB per le penddrive, l'ingresso per le MMC\SD e per i CD ma non vedo un ingresso AUX.

Dietro l'autoradio sono liberi due cavi giallo e rosso ma credo siano per il subwoofer.

SONO SPACCIATO...?

Aiutatemi please.

Link to comment
Condividi su altri siti

Scusate la domanda, sono nuovo ed ho appena acquistato il nokia 6630.

La mia autoradio sul frontalino ha l'ingresso USB per le penddrive, l'ingresso per le MMC\SD e per i CD ma non vedo un ingresso AUX.

Dietro l'autoradio sono liberi due cavi giallo e rosso ma credo siano per il subwoofer.

SONO SPACCIATO...?

Aiutatemi please.

AZZ...hai un'autoradio che ti fa le uova all'occhio di bue e non hai un ingresso aux?? mi sembra davvero strano... controlla sul libretto di istruzioni dell'autoradio a cosa corrispondono i due cavi giallo e rosso! b)

Link to comment
Condividi su altri siti

...se invece qualcuno vuole cimentarsi in una modifica ancora piu' estrema...cioè trasformare la pop-port in una femmina jack da 3.5.... praticamente quello che fa l'adattatore originale NOKIA AD-15 (che per dovere di cronaca costa 15 euro... e forse detto ciò non vale nemmeno la pena mettersi all'opera con questa soluzione...) cmq ad ogni modo vi copio qui questo tutorial pescato su altri lidi:

3349247479270992.JPG

-------------------------------------------------------------------------

When Nokia announced their music player capable phones they neglected to mention the lack of support for external headphones. Since the release of the 6230 and its related family with mp3/aac playback support, many disgruntled users have made their own home-brew cables to plug in headphones. Today we will show one such mod for the Nokia HDS-3 cable. This cable ships with the 6230 and other Nokia phones capable of stereo playback.

by Fabienne Serriere

Before starting, a quick rundown of some other Nokia models of pop port headphones and audio adapters include:

Nokia HS-3 “Nokia Stereo Fashion Headset” white or black, smaller push to talk unit than the HDS-3, headphones are still of an inferior audio quality

http://www.nokia.com/nokia/0,,46406,00.html

Nokia HS-8 “Nokia Activity Headset” ugly and bad audio quality headphones

http://www.nokia.com/nokia/0,,54584,00.html

Nokia HS-6 “Display Headset” lcd display and controls for audio and calls, but yet again no port to plug in your own headphones

http://www.nokia.com/nokia/0,,69627,00.html

Nokia HS-23 “Nokia Stereo Headset” includes volume control, lesser quality headphones

http://www.nokia.com/nokia/0,,70983,00.html

Nokia AD-15 “Nokia Audio Adapter” allows you to plug in your own headphones, unfortunately this is achieved with a big box on the end of the cable, there is no mic, and as far as we can tell no button to switch tracks.

http://www.nokia.com/nokia/0,,70955,00.html

Even headset models that are not available on the market yet don’t allow for the consumer to plug in their own headphones. Why Nokia? Why! For a few weeks we assumed that the audio quality coming out of our 6230 was just as dismal as the headphones in the HDS-3 headset led us to believe. The astonishing part is that no, the audio quality of the 6230 is comparable to most mp3 players on the market once you manufacture your own adapter cable.

The second mistake by Nokia is the misinformation as to how much memory can be recognized on the mmc cards. The manual for the 6230 states the mmc card can be up to 128 mb. In reality the phone can recognize mmc cards up to 1 gig. To see if your phone’s firmware is up to date enough to work with that much memory, in the 6230 type: *#0000#. On the screen you should see something similar to:

Nokia 6230

V 05.24

25-11-04

etc.

The important information in this is of course the firmware version on the second line, in this case 5.24. If your phone is not up to date you can have the firmware flashed at most cell phone provider stores. Note that firmware upgrades will wipe the memory of the phone, so be sure to save important info before upgrading. The firmware of the 6230 starting with version 4.44 should correctly recognize 1 gig of memory on the mmc, but may not search the subdirectories on the card for music files to include in the playlist. Before loading audio on the mmc card, we suggest you format it in a card reader on your computer rather than on the phone. Format the card, re-name the card, then fill that 1 gig of happiness with a playlist of mp3/aac and/or mp4 if you have a Nokia model that supports it.

You will need for this how-to: a soldering iron, a knife of some sort, a multimeter, a round file, a Nokia stereo headset (we will be using the HDS-3, but you should be able to extrapolate to another on the list above), a cable with a female mini jack (3.5 mm) connector on one end, or if you have only a cable with a male mini jack connector you will also require a mini jack female to mini jack female adapter. You may also need a small philips screwdriver depending on the model and make of your Nokia headset.

The Nokia HDS-3 (ships with many Nokia models including the 6230):

-------------------------------------------------------------------------

0669090565609655.JPG

-------------------------------------------------------------------------

2983334809144291.JPG

-------------------------------------------------------------------------

The HDS-3 has several flavors: the older models have four screws on the back of the push to talk module. If you have this model, first remove the screws. Now for both models, we are ready to pop open the connector. We use a knife to carefully separate the front from the back of the push to talk unit in the middle of the cable:

-------------------------------------------------------------------------

0412065763230508.JPG

-------------------------------------------------------------------------

Once the unit is open, check to see if the speaker is on the front or the back of the unit. Chances are if you have a model with screws, your solder points for the headphones are already visible. If you have the newer model without screws on the outside, you must now carefully pry up the circuit board and flip it over.

-------------------------------------------------------------------------

6844164427441485.JPG

-------------------------------------------------------------------------

If you have the newer model your circuit board should resemble this:

-------------------------------------------------------------------------

2116803924623324.JPG

-------------------------------------------------------------------------

Note the connections on the circuit board. The headphones Nokia supplies are attached to (from left to right) L-, L+, R+, R-. These are the points which we are now going to de-solder:

-------------------------------------------------------------------------

7391976875464954.JPG

-------------------------------------------------------------------------

Your de-soldered circuit board will now look something like this:

-------------------------------------------------------------------------

5832728850559352.JPG

-------------------------------------------------------------------------

Next prepare your female mini jack cable by cutting it to the desired length (we chose a length of about 8 centimeters). This length will be how long the mini jack cable extends out from the push to talk unit. Denude the cables leaving a half centimeter of shielding over the two audio cables. Split the grounding wires into two separate bundles and twist each so they are to the outside of the audio cables:

-------------------------------------------------------------------------

6202198331131743.JPG

-------------------------------------------------------------------------

Determining which is right and left in the mini jack cable is easy if the colors of the cables are red and white. Red is right and white is left. If, like us, you found yourself with a creatively colored cable, notably orange and yellow, bust out your multimeter and a male mini jack connector on a cable that has been similarly denuded. Test the male mini jack connector with a multimeter and note the wiring, for example our male mini jack connector was (where tip is the tip of the connector, ring is the middle, and sleeve is the base):

TIP orange

RING yellow

SLEEVE ground

This meant that our mini jack female connector would have the same pin-out because the female and male mini jack in this case were cut from the same cable. Let us assume for a moment that your male mini jack connector came from a different cable and had this pin-out:

TIP white

RING red

SLEEVE ground

We would then simply plug the male mini jack into the female mini jack and test the cable with a multimeter to determine the pin-out. In the example noted above:

TIP white === orange

male RING red === yellow female

SLEEVE ground === ground

Now we can extrapolate from the fact that on a tip-ring-sleeve style connector the pin-out for L/R/ground is:

TIP left

RING red

SLEEVE ground

This leaves us with the wiring to the circuit board as follows:

TIP left orange

RING right yellow

SLEEVE ground ground

So to solder to our circuit board we will have:

L- ground (remember we have 2 grounds which we split above)

L+ orange

R+ yellow

R- ground (here is the second ground)

Your diagram may be a bit different depending on the colors of your female mini jack cable. A common example would be:

L- ground (remember we have 2 grounds which we split above)

L+ white

R+ red

R- ground (here is the second ground)

As noted above, we split the the grounding cable into two parts. Next tin your cables (prepare them with a bit of solder on them) and trim them down. Solder them onto the points on the circuit board of the push to talk unit following the diagram you have made yourself with the tip-ring-sleeve explanation above:

-------------------------------------------------------------------------

1376152272762463.JPG

-------------------------------------------------------------------------

Link to comment
Condividi su altri siti

...e per concludere...la parte finale!! b)

Now file a rounded notch to let the cable exit out of the top center of the push to talk unit. You only need to file the notch into the backside of the unit (the side without the button):

-------------------------------------------------------------------------

6685826471424560.JPG

-------------------------------------------------------------------------

Next gently push the circuit board back into place. Nudge the new mini jack cable into the notch you’ve just made:

-------------------------------------------------------------------------

1523287975352721.JPG

-------------------------------------------------------------------------

9254839859537138.JPG

-------------------------------------------------------------------------

If you have the older version of the HDS-3 with the four screws on the back, your completed circuit will look like this before you close it back up:

-------------------------------------------------------------------------

6213322554476309.JPG

-------------------------------------------------------------------------

Now snap the two side of the push to talk unit back together, and if you had screws, replace the screws. Alternately, if you wish to change the fugly beige color of the unit, do so before you close the unit. Tape off the button and the base cable. Bust out that black nail polish from your goth phase or some black hobby model paint from that black hawk helicopter you never finished. Alternatively you can pick a more vibrant color to match your colorware computer. Give the unit two coats of paint, leaving time for it to dry between coats. If you don’t dig paint, you can also go for the ghetto black electrical tape look (see below for an example). Here is the completed unit (unpainted) with a pair of not-so-stellar sony in-ear headphones and a Nokia 6230:

-------------------------------------------------------------------------

9771223811266423.JPG

-------------------------------------------------------------------------

Version 01 with ghetto black electrical tape, a male mini jack connector and a female to female mini jack adapter and the same not-so-stellar sony in-ear headphones:

-------------------------------------------------------------------------

3352683157181226.JPG

-------------------------------------------------------------------------

The completed new version cable with a delicious pair of Sony pro headphones:

-------------------------------------------------------------------------

3349247479270992.JPG

-------------------------------------------------------------------------

If you are feeling adventurous and in need of analog volume control on the push to talk unit, hop over to hack-a-day to read the advanced How-To. Nokia, if you are listening, please include ports for standard headphones on the phone itself and if not, at least in the cables that are provided with the phone.

SPERO VI POSSA ESSER UTILE! b)

Modificato da DarkHorse
Link to comment
Condividi su altri siti

Purtroppo DARKHORSE si....

Chiedo aiuto anche al grande Lupone, io dietro l'autoradio ha 3 file che terminano con 3 jack: uno GIALLO, uno Rosso e uno BIANCO.

Quello giallo ha la scritta SUB W e quindi suppongo ( dall'alto della mia ignoranza ) sia il subwoofer, quello bianco e quello rosso hanni la scritta LINE OUT e non LINE IN.

Cosa posso fare?

Aiutatemi ragazzi!!!

Link to comment
Condividi su altri siti

Esatto! Io avrei bisogno dei due ingressi line in utile per la guida di Lupone ma purtroppo mi ritrovo con quello giallo per il subw e i due ( bianco/rosso) LINE OUT che suppongo servano per quei mega bomboloni che si mettone in macchina!!!

Credo di nn avere molte speranze di collegare il mio nokiotto all'impianto vero?

Link to comment
Condividi su altri siti

a scanso di equivoci ti dico cosa penso io:

il LINE OUT è un USCITA non amplificata che serve per collegare l'amplificatore esterno di conseguenza NON collegare nulla a questo cavo.

Anche il cavo con la scritta Subwoofer è UN'USCITA del segnale tagliato per i bassi... da collegare all'eventuale subwoofer per poter poi comandare dall'autoradio se aumentare o diminuire l'intervento del SUB.

Direi che a questo punto... se non hai INGRESSI... ma solo uscite decisamente non hai speranze.

Ma mi sembra davvero strano che un'autoradio che legge pure chiavette usb e memory non abbia un semplice ingresso AUX o jack... b)b)

Link to comment
Condividi su altri siti

Please sign in to comment

You will be able to leave a comment after signing in



Accedi Ora
 Share


×
×
  • Crea Nuovo...

Informazione Importante

Questo sito utilizza i cookie per analisi, contenuti personalizzati e pubblicità. Continuando la navigazione, accetti l'utilizzo dei cookie da parte nostra | Privacy Policy