Jump to content
Nokioteca Forum

Nokia C7 (Firmare Update)


maxdel71
 Share

Recommended Posts

Ho fatto un pasticcio

La prima volta ci sono riuscito cioè ho aggiornato il mio Nokia C7 (Garanzia Europa) in italiano Symbian Anna con Phoenix

poi per sbaglio ho aggiornato in Symbian Belle in lingua originale con Ovi Suite, qui mi ha fatto innervosire e cosi volevo riportare al Symbian Belle ma adesso il mio nokia non si accende più...

Se clicco il power non si accende ma vibra e lampeggia

Faccio la stessa procedura, prima scarico con Navfirm:

1) Nokia C7-00 (RM-675)

2) 25.7

3) Euro 1_Italy_charcoal back

poi con Phoenix apro come amministrazione :

Su Connections: (No Connection)

1) Clicco File/ Open Product, clicco RM-675

2) Firmware Update seleziono i 3 puntini e clicco su "Euro 1_Italy_charcoal back"

3) Options: "Delete" sulla barra evidenziata in "rosso"

4) Attivo la spunta su "Dead phone USB flashing"

5) Refurbish

6) Apre una finestra: 1) staccare la porta USB 2) Rimuovere Batteria 3) Connect USB 4) Insert Battery 5) Press OK

7) Apre un'altra finestra: 1) Disconnect USB cable 2) Connect USB cable 3) OK

Fin qui è ok. Dopo un pò i da errore:

Firmware Updating Failed.

Flashing finalization failed. Do you like to retry the finalizing?

HRESULT 0x8421001c (-2078212068)

Firmware: Cannot verify communication to phone after flashing. Make sure that phone booted up correctly and retry.

O sbaglio qualcosa o devo buttare il cellulare ?

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Flashing started

Creating product data items list

Product data items list created

Backup not required

Flashing phone

Initializing

Scanning image files...

Waiting for USB device...

Loading secondary boot code: 15168 bytes

Secondary boot loaded

Loading update server code: 825443 bytes

Update server loaded

Partitioning....

Partitioning complete

Erasing....

Erasing complete

Asic CMT: Start programming 333335 KB...

Asic CMT: Programming data sent: 0%

Asic CMT: Programming data sent: 10%

Asic CMT: Programming data sent: 20%

Asic CMT: Programming data sent: 30%

Asic CMT: Programming data sent: 40%

Asic CMT: Programming data sent: 50%

Asic CMT: Programming data sent: 60%

Asic CMT: Programming data sent: 70%

Asic CMT: Programming data sent: 80%

Asic CMT: Programming data sent: 90%

Asic CMT: Programming data sent: 100%

Programming complete

WARNING: Asic CMT: NAND status reported bad blocks

Asic CMT: programming succeeded

Asic CMT: Verifying communication to device...

Waiting for communication response: 25

Waiting for communication response: 24

Waiting for communication response: 23

Waiting for communication response: 22

Waiting for communication response: 21

Waiting for communication response: 20

Waiting for communication response: 19

Waiting for communication response: 18

Waiting for communication response: 17

Waiting for communication response: 16

Waiting for communication response: 15

Waiting for communication response: 14

Waiting for communication response: 13

Waiting for communication response: 12

Waiting for communication response: 11

Waiting for communication response: 10

Waiting for communication response: 9

Waiting for communication response: 8

Waiting for communication response: 7

Waiting for communication response: 6

Waiting for communication response: 5

Waiting for communication response: 4

Waiting for communication response: 3

Waiting for communication response: 2

Starting to recover the phone

Recoverying phone

Initializing

Waiting for communication response: 1

Error 0x8401F121 communicating to phone. Unable to verify comm.

Warning: Unable to communicate to product after flashing

Scanning image files...

Phone recovery completed. Waiting for phone to boot up

Bootup successful

Verifying communication to product (before flash finalizing)

Failed to verfy communication to product

All operations completed

Firmware updating failed.

Link to comment
Condividi su altri siti

  • 2 mesi dopo...
  • 2 settimane dopo...

ho bisogno anch'io di aiuto... ho un problema simile...

è vietato il crossposting, invece di scrivere a 200 parti, apri un thread tuo, spiega esattamente cosa fai e cosa succede e vediamo di aiutarti.

devi aiutarci a permetterti di aiutarti, perchè se non dici nulla, non riusciamo, senza una sfera di cristallo purtroppo :D

Link to comment
Condividi su altri siti

Ho fatto un pasticcio

La prima volta ci sono riuscito cioè ho aggiornato il mio Nokia C7 (Garanzia Europa) in italiano Symbian Anna con Phoenix

poi per sbaglio ho aggiornato in Symbian Belle in lingua originale con Ovi Suite, qui mi ha fatto innervosire e cosi volevo riportare al Symbian Belle ma adesso il mio nokia non si accende più...

Se clicco il power non si accende ma vibra e lampeggia

Faccio la stessa procedura, prima scarico con Navfirm:

1) Nokia C7-00 (RM-675)

2) 25.7

3) Euro 1_Italy_charcoal back

poi con Phoenix apro come amministrazione :

Su Connections: (No Connection)

1) Clicco File/ Open Product, clicco RM-675

2) Firmware Update seleziono i 3 puntini e clicco su "Euro 1_Italy_charcoal back"

3) Options: "Delete" sulla barra evidenziata in "rosso"

4) Attivo la spunta su "Dead phone USB flashing"

5) Refurbish

6) Apre una finestra: 1) staccare la porta USB 2) Rimuovere Batteria 3) Connect USB 4) Insert Battery 5) Press OK

7) Apre un'altra finestra: 1) Disconnect USB cable 2) Connect USB cable 3) OK

Fin qui è ok. Dopo un pò i da errore:

Firmware Updating Failed.

Flashing finalization failed. Do you like to retry the finalizing?

HRESULT 0x8421001c (-2078212068)

Firmware: Cannot verify communication to phone after flashing. Make sure that phone booted up correctly and retry.

O sbaglio qualcosa o devo buttare il cellulare ?

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~

Flashing started

Creating product data items list

Product data items list created

Backup not required

Flashing phone

Initializing

Scanning image files...

Waiting for USB device...

Loading secondary boot code: 15168 bytes

Secondary boot loaded

Loading update server code: 825443 bytes

Update server loaded

Partitioning....

Partitioning complete

Erasing....

Erasing complete

Asic CMT: Start programming 333335 KB...

Asic CMT: Programming data sent: 0%

Asic CMT: Programming data sent: 10%

Asic CMT: Programming data sent: 20%

Asic CMT: Programming data sent: 30%

Asic CMT: Programming data sent: 40%

Asic CMT: Programming data sent: 50%

Asic CMT: Programming data sent: 60%

Asic CMT: Programming data sent: 70%

Asic CMT: Programming data sent: 80%

Asic CMT: Programming data sent: 90%

Asic CMT: Programming data sent: 100%

Programming complete

WARNING: Asic CMT: NAND status reported bad blocks

Asic CMT: programming succeeded

Asic CMT: Verifying communication to device...

Waiting for communication response: 25

Waiting for communication response: 24

Waiting for communication response: 23

Waiting for communication response: 22

Waiting for communication response: 21

Waiting for communication response: 20

Waiting for communication response: 19

Waiting for communication response: 18

Waiting for communication response: 17

Waiting for communication response: 16

Waiting for communication response: 15

Waiting for communication response: 14

Waiting for communication response: 13

Waiting for communication response: 12

Waiting for communication response: 11

Waiting for communication response: 10

Waiting for communication response: 9

Waiting for communication response: 8

Waiting for communication response: 7

Waiting for communication response: 6

Waiting for communication response: 5

Waiting for communication response: 4

Waiting for communication response: 3

Waiting for communication response: 2

Starting to recover the phone

Recoverying phone

Initializing

Waiting for communication response: 1

Error 0x8401F121 communicating to phone. Unable to verify comm.

Warning: Unable to communicate to product after flashing

Scanning image files...

Phone recovery completed. Waiting for phone to boot up

Bootup successful

Verifying communication to product (before flash finalizing)

Failed to verfy communication to product

All operations completed

Firmware updating failed.

ho letto solo ora, o segui questa procedura per downgrade

https://www.nokioteca.net/home/forum/index.php/topic/221397-link-thread-laboriosa-procedura-downgrade/

oppure flash belle, non puoi tornare ad anna in modo semplice.

Link to comment
Condividi su altri siti

Please sign in to comment

You will be able to leave a comment after signing in



Accedi Ora
 Share

×
×
  • Crea Nuovo...

Informazione Importante

Questo sito utilizza i cookie per analisi, contenuti personalizzati e pubblicità. Continuando la navigazione, accetti l'utilizzo dei cookie da parte nostra | Privacy Policy