Drakenn 0 Posted July 26, 2011 Report Share Posted July 26, 2011 i file del firmware li scarichi da navifirm grazie mille. Allora provo la guida. Un ultima domanda....come faccio a sapere il mio Product Code? Quote Link to post Share on other sites
Bart65 67 Posted July 26, 2011 Report Share Posted July 26, 2011 il product code è un codice di 7 cifre lo trovi nel vano batteria Quote Link to post Share on other sites
Drakenn 0 Posted July 26, 2011 Report Share Posted July 26, 2011 (edited) il product code è un codice di 7 cifre lo trovi nel vano batteria Sei un mostro!!!! (in senso buono!) ---------- EDIT1: HELP!!!! una volta preso navifirm mi dice di scegliere una release! quale? mi compaiono numeri come 10.0.02-11.0.02........ ç_ç EDIT2: Risolto scusa... Edited July 26, 2011 by Drakenn Quote Link to post Share on other sites
Bart65 67 Posted July 26, 2011 Report Share Posted July 26, 2011 Sei un mostro!!!! (in senso buono!) ---------- EDIT1: HELP!!!! una volta preso navifirm mi dice di scegliere una release! quale? mi compaiono numeri come 10.0.02-11.0.02........ ç_ç EDIT2: Risolto scusa... figurati, se hai bisogno chiedi. i file scarica quelli preselezionati Quote Link to post Share on other sites
Drakenn 0 Posted July 26, 2011 Report Share Posted July 26, 2011 figurati, se hai bisogno chiedi. i file scarica quelli preselezionati Grazie! Comunque visto che sei così gentile apprezzo l'aiuto. alla fine, mentre clicco su "Refurbish", mi esce una tendina The flashing failed. Do you want to retry the flashing? HRESULT 0x8401f141 (-2080247487) Flash: Boot rom was not detected after phone boot up. Unable to start flashing. Che devo fare? D: Quote Link to post Share on other sites
Bart65 67 Posted July 26, 2011 Report Share Posted July 26, 2011 Grazie! Comunque visto che sei così gentile apprezzo l'aiuto. alla fine, mentre clicco su "Refurbish", mi esce una tendina The flashing failed. Do you want to retry the flashing? HRESULT 0x8401f141 (-2080247487) Flash: Boot rom was not detected after phone boot up. Unable to start flashing. Che devo fare? D: non sono molto ferrato su queste cose... provare a rifare la procedura facendo attenzione a tutti i passaggi Quote Link to post Share on other sites
Drakenn 0 Posted July 26, 2011 Report Share Posted July 26, 2011 non sono molto ferrato su queste cose... provare a rifare la procedura facendo attenzione a tutti i passaggi okay più tardi riprovo e faccio sapere XD! Quote Link to post Share on other sites
Drakenn 0 Posted July 26, 2011 Report Share Posted July 26, 2011 (edited) apparentemente sembra flashato grazie mille farò sapere domani! zauuush e grazie! EDIT: l'ho flashato ma comunque mi dice che ha bisogni dei certificati in alcune apps, io nn capisco. Eppure sapevo che flasharlo sarebbe bastato. Alla fine mi serve solo per mettere un'applicazione. Ho provato anche la sezione dei certificati ma non fungono (programma SinSis-GUI per signare) emmò? D: Edited July 26, 2011 by Drakenn Quote Link to post Share on other sites
Bart65 67 Posted July 26, 2011 Report Share Posted July 26, 2011 vorrei aggiungere che almeno per C6, oggi phoenix dopo il brik non mi riconosceva il cell. per far si che ciò avvenga dopo aver collegato il cell e cliccato ok premete il rosso del cell come quando lo accendete Quote Link to post Share on other sites
Drakenn 0 Posted July 27, 2011 Report Share Posted July 27, 2011 io penso di averlo flashato perchè alla fine del procedimento devo immettere le impostazioni (come se si resettasse) ma nulla. Ho provato anche come dici tu. peso che rinuncio XD Quote Link to post Share on other sites
Sdentato 6 Posted July 27, 2011 Report Share Posted July 27, 2011 Ragazzi ho un nokia 6120c fw 6.01, ho provato a fare l'hack istallando un cooked firmware, ma al momento di fare refurbish, parte l'istallazione del firmware ma mi da questo errore: The flashing failed. Do you want to retry the flashing? HRESULT 0x8401f141. Che devo fare??? ho provato anche a fare "retry" ma nulla da sempre lo stesso errore! Vi prego aiutatemi!!!! :( :( :( Quote Link to post Share on other sites
Sdentato 6 Posted July 27, 2011 Report Share Posted July 27, 2011 (edited) Grazie! Comunque visto che sei così gentile apprezzo l'aiuto. alla fine, mentre clicco su "Refurbish", mi esce una tendina The flashing failed. Do you want to retry the flashing? HRESULT 0x8401f141 (-2080247487) Flash: Boot rom was not detected after phone boot up. Unable to start flashing. Che devo fare? D: Ciao Drakenn io ho lo stesso tuo problema!!!!! :incazzato: Edited July 27, 2011 by RICCARDO97 Quote Link to post Share on other sites
ddad 0 Posted July 29, 2011 Report Share Posted July 29, 2011 ciao, ho un n97, nel menu flash firmware update è in grigio... non posso cliccarlo... cosa fare? Quote Link to post Share on other sites
Bart65 67 Posted July 29, 2011 Report Share Posted July 29, 2011 (edited) sicuro di aver creato la cartella, messo i file e aver messo il percorso in data package e selezionato l'rm ? Bene,adesso sarete in grado di andare in Flashing>Firmware Update Edited July 29, 2011 by ottodisc Quote Link to post Share on other sites
Romazaki 10 Posted August 10, 2011 Report Share Posted August 10, 2011 Umm, per coloro a cui spunta l'errore "The flashing failed. Do you want to retry the flashing? HRESULT 0x8401f141 (-2080247487) Flash: Boot rom was not detected after phone boot up. Unable to start flashing.", dovete eseguire tutta la procedura di flashing NON in modalità "Dead phone USB flashing", ricordandovi anche di mettere, nella schermata principale di Phoenix, a posto di "NO CONNECTION", "USB1" (dovrebbe esserci scritto accanto anche l'RM del vostro telefono. Infine, la procedura in questo caso DEVE essere fatta a cellulare acceso, ovviamente senza Ovi Suite aperto. 1 Quote Link to post Share on other sites
Bart65 67 Posted August 10, 2011 Report Share Posted August 10, 2011 Umm, per coloro a cui spunta l'errore "The flashing failed. Do you want to retry the flashing? HRESULT 0x8401f141 (-2080247487) Flash: Boot rom was not detected after phone boot up. Unable to start flashing.", dovete eseguire tutta la procedura di flashing NON in modalità "Dead phone USB flashing", ricordandovi anche di mettere, nella schermata principale di Phoenix, a posto di "NO CONNECTION", "USB1" (dovrebbe esserci scritto accanto anche l'RM del vostro telefono. Infine, la procedura in questo caso DEVE essere fatta a cellulare acceso, ovviamente senza Ovi Suite aperto. hai provato a premere per circa 2 secondi il tasto d'accensione dopo averlo collegato? altrimenti non trova la rom di avvio... anche io avevo questo problema credevo che con phoenix il cell sarebbe partito da solo ma mi dava il tuo stesso errore, poi ho premuto accensione per 2 secondi ed è partito il flash Quote Link to post Share on other sites
Romazaki 10 Posted August 10, 2011 Report Share Posted August 10, 2011 Nono, facendo come ho scritto nel commento precedente non mi ha dato nessunissimo errore, non ho avuto nemmeno bisogno di premere il tasto d'accensione. Quote Link to post Share on other sites
Bart65 67 Posted August 10, 2011 Report Share Posted August 10, 2011 dicevo seguendo la guida... comunque tutto ok Quote Link to post Share on other sites
Romazaki 10 Posted August 10, 2011 Report Share Posted August 10, 2011 aaah, no, non avevo provato Buono a sapersi, in caso dovessi ritentare Quote Link to post Share on other sites
mirkoli30 0 Posted August 10, 2011 Report Share Posted August 10, 2011 Ciao romazky fatto come hai descritto tu stava funzionando poi ad un certo punto phoenix si è bloccao e si è spento adesso il telefono non si accende come posso fare? Quote Link to post Share on other sites
Bart65 67 Posted August 10, 2011 Report Share Posted August 10, 2011 Ciao romazky fatto come hai descritto tu stava funzionando poi ad un certo punto phoenix si è bloccao e si è spento adesso il telefono non si accende come posso fare? prova a seguire le indicazioni della guida Quote Link to post Share on other sites
Romazaki 10 Posted August 11, 2011 Report Share Posted August 11, 2011 Ciao romazky fatto come hai descritto tu stava funzionando poi ad un certo punto phoenix si è bloccao e si è spento adesso il telefono non si accende come posso fare? Per caso prima che si spegnesse sullo schermo c'era scritto ''nokia beta mode'' o qualcosa del genere? Quote Link to post Share on other sites
Bart65 67 Posted August 11, 2011 Report Share Posted August 11, 2011 (edited) di solito ( almeno quando aggiorno e flasho ) esce nokia local mode... Edited August 11, 2011 by ottodisc Quote Link to post Share on other sites
Romazaki 10 Posted August 11, 2011 Report Share Posted August 11, 2011 di solito ( almeno quando aggiorno e flasho ) esce nokia local mode... Ecco, quello lì, non ricordavo di preciso Quote Link to post Share on other sites
omega83 0 Posted August 11, 2011 Report Share Posted August 11, 2011 (edited) a me non riesce l'installazione. Alla fine mi da errore riguardo al file "crack.exe". Il programma risulta installato ma se lo apro mi dice "install a nokia dongle".Se clicco ok la finestra di avviso scompare, resta l'immagine del programma in apertura ma l'applicazione non risponde. Edit: problema risolto, ma ora il problema è un altro! Edited August 11, 2011 by omega83 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.