iFraska Posted February 2, 2011 Report Share Posted February 2, 2011 (edited) Guida per flashare un porting 1. scaricare il firmware compatibile per il tuo cellulare (link alla fine della discussione) 2. copiate i file scaricati in "C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356" 2.1 aprite J.A.F e settatelo come da immagine 2.2 a questo punto accendete il cellulare, collegatelo al PC, selezionate la modalita' "PC Suite" e da J.A.F. selezionate il vostro cellulare. prima di premere flash jaf deve essere così (grazie a luca2006): 2.3 controllando che tutte i segnali verdi siano accessi (escludendo ADSP e APE User Disk), spegnete il cellulare, clickate su Flash e poi date l'ok alla finestra che si aprirà, effettuate quindi una lieve pressione al tasto di accensione 2.4 a questo punto partirà il flashing, attendete qualche minuto, quando jaf "vi dirà" "Done!" vuol dire che è tutto concluso staccate il telefono dal computer, togliete la batteria del telefono quindi accendetelo ed ecco a voi il nuovo firmware NFE 0.3: http://www.multiupload.com/ORDLCVNAB1 Porting ufficiale del pnht: http://www.nokioteca.net/home/forum/index.php/topic/196365-porting-ufficiale-c6-00-pnht-su-nokia-5800-e-523x/ Porting di binh24: http://www.nokioteca.net/home/forum/index.php/topic/196366-porting-c6-00-by-binh24-su-5800-5530-523x-x6/ jaf+pkey emulator V 3: http://www.mediafire.com/?lynkjyziiez ATTENZIONE NE IO NE NOKIOTECA CI ASSUMIAMO RESPONSABILITÀ PER UN USO NON CORRETTO DEI FILE\GUIDA. FLSHATE A VOSTRO RISCHIO E PERICOLO. FLASHARE UN FIRMWARE INVALIDA LA GARANZIA. Edited September 11, 2011 by Roger1 Link to comment Share on other sites More sharing options...
SkylineR34 Posted February 13, 2011 Report Share Posted February 13, 2011 io consiglio di settare su jaf anche "Normal mode" cosi nn si deve togliere la batteria e rimetterla Link to comment Share on other sites More sharing options...
Darkangel Posted February 13, 2011 Report Share Posted February 13, 2011 io consiglio di settare su jaf anche "Normal mode" cosi nn si deve togliere la batteria e rimetterla settarlo dove di preciso? io l'ho settato sempre come in figura. dopo di che dopo il fasl in phone mode si mette normal mode. da come lo hai detto tu sembra ti riferisci al campo check box Link to comment Share on other sites More sharing options...
citalino Posted February 14, 2011 Report Share Posted February 14, 2011 salve io sul mio disco c: non ho il percorso C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356 come faccio?? Link to comment Share on other sites More sharing options...
Darkangel Posted February 14, 2011 Report Share Posted February 14, 2011 salve io sul mio disco c: non ho il percorso C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356 come faccio?? utilizza il path indicato nella terza figura Link to comment Share on other sites More sharing options...
citalino Posted February 14, 2011 Report Share Posted February 14, 2011 non ci capisco niente con questi termini! che significa? Link to comment Share on other sites More sharing options...
Il.Socio Posted February 14, 2011 Report Share Posted February 14, 2011 (edited) Se non capisci niente di questi termini, il mio consiglio e' di non fare nulla, ed aspettare di avere acquisito maggiore competenza nell'ambito, a partire dalla terminologia... Altrimenti rischi di fare danni. Edited February 14, 2011 by Il.Socio Link to comment Share on other sites More sharing options...
FaioMan Posted May 3, 2011 Report Share Posted May 3, 2011 Ragazzi ho seguito questa guida ma pure io non trovo questo percorso C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-356 ma non trovo nemmeno questo C:\Program Files\Nokia\Phoenix\Products\\ °___° ma dove devo andare allora a mettere sti file? Link to comment Share on other sites More sharing options...
Il.Socio Posted May 3, 2011 Report Share Posted May 3, 2011 Usa la ricerca di windows e cerca "Products"... Link to comment Share on other sites More sharing options...
buccio dj Posted June 22, 2011 Report Share Posted June 22, 2011 ragazzi scusate ma io d solito flasho col percoso ..../phoenix/....x intenderci qll k si vede nella terza immagine...ma ora vedo k voi usate un altro percorso...cs cambia?posso continuare a flashare cm ho sempre fatto? Link to comment Share on other sites More sharing options...
Darkangel Posted June 23, 2011 Report Share Posted June 23, 2011 se ti funziona certo. a quanto ne so jaf non legge sempre dallo stesso path, quindi in alcuni casi cambia ma questo non vuol dire che non funzioni lo stesso Link to comment Share on other sites More sharing options...
mauro98 Posted June 29, 2011 Report Share Posted June 29, 2011 ma siamo sicuri ke nn si rompe Link to comment Share on other sites More sharing options...
Darkangel Posted June 29, 2011 Report Share Posted June 29, 2011 la procedura non è immune da rischi, ma se la si fa stando attenti a cio che si fa non ci dovrebbero essere problemi. se vuoi la certezza nessuno te la da. quindi in questo caso meglio non avventurarsi Link to comment Share on other sites More sharing options...
' e N T i X z Posted July 29, 2011 Report Share Posted July 29, 2011 perchè quando dici di spingere mezzo secondo il tasto di accensione mi dice che non trova il telefono jaf?? Link to comment Share on other sites More sharing options...
Roger1 Posted July 29, 2011 Report Share Posted July 29, 2011 perchè quando dici di spingere mezzo secondo il tasto di accensione mi dice che non trova il telefono jaf?? perchè carica i drivers, l'operazione potrebbe essere ripetuta anche più volte. Link to comment Share on other sites More sharing options...
fabio_c Posted August 2, 2011 Report Share Posted August 2, 2011 Usa la ricerca di windows e cerca "Products"... non trovo nnt si nnt XD mi puoi dare altre delucidazioni?!? Link to comment Share on other sites More sharing options...
Ghost_X_90 Posted August 4, 2011 Report Share Posted August 4, 2011 ...effettuate quindi una lieve pressione al tasto di accensione... Per "lieve" si intende 'premere il pulsante per poco tempo' o 'premere senza farlo scattare'? Link to comment Share on other sites More sharing options...
iFraska Posted August 4, 2011 Author Report Share Posted August 4, 2011 devi premere ma non come per accenderlo devi dare solo un colpo in modo che il pc rilevi la periferica collegata Link to comment Share on other sites More sharing options...
fabio_c Posted August 7, 2011 Report Share Posted August 7, 2011 non trovo il file prod.core.c00 una volta usai un'altra estensione l'avevo letto sul forum solo che non mi ricordo l'estensione che mi consigliarono.... (ho un nokia 5800 xm) Link to comment Share on other sites More sharing options...
italyanker Posted September 11, 2011 Report Share Posted September 11, 2011 Domanda stupida...Io JAF...Da dove lo scarico? Link to comment Share on other sites More sharing options...
Roger1 Posted September 11, 2011 Report Share Posted September 11, 2011 Domanda stupida...Io JAF...Da dove lo scarico? dal primo post, ho aggiunto il link Link to comment Share on other sites More sharing options...
italyanker Posted September 11, 2011 Report Share Posted September 11, 2011 denghiu! Link to comment Share on other sites More sharing options...
menes81 Posted September 13, 2011 Report Share Posted September 13, 2011 a me invece all'apertura del jaf da errore di dongle e non si avvia.... Link to comment Share on other sites More sharing options...
Roger1 Posted September 13, 2011 Report Share Posted September 13, 2011 Lo avvii dall'emulatore? Link to comment Share on other sites More sharing options...
italyanker Posted September 13, 2011 Report Share Posted September 13, 2011 (edited) ah finalmente sono riuscito ad avviarlo! @Menes avvia in modalità compatibilità con xp l'emulatore...poi fai go...e si avvia JAF... Però ora non riesco a trovare la cartella... Ho win7! E' possibile che la cartella si trovi in C:\ProgramData\Nokia\Nokia Service Layer\A\nsl_service_module_00001\vpls\www.dsut.online.nokia.com.oti.caresuite\Products\ ? Tra parentesi sto mettendo iDroid 8.4 Edited September 13, 2011 by italyanker Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now