Jump to content
Nokioteca Forum

[rompacher] Changebrowseronkey0


Puccho's
 Share

Recommended Posts

  • 3 settimane dopo...
  • Risposte 66
  • Created
  • Ultima Risposta

Top Posters In This Topic

scusate chi mi spiega i passaggi che devo fare per trovare l uid di opera con best taskman? non riesco a trovarla!

edit: trovato il mio uid è

2000015a

invertito dovrebbe uscire 5a100020

ho salvato e applicato la pacht e mi esce la crocetta verde però quando clicco zero esce ancora il default cm mai?

grazie..

Modificato da 88baby88
Link to comment
Condividi su altri siti

Devi mettere al posto dei numeri rossi della guida questi: 5a010020

Fatto, ma mi rimane la X rossa...

Vedi se è giusto perfavore:

; *** ChangeBrowserOnKey0 1.0 ***

; *** Change Browser On Key '0' ***

; Author: fca00000 , fca00000-at-yahoo-dot-es

; Date: 2008.06.01

; Firmware: tested on N80 v 5.0719.02 . Might work on preFP1+FP1

;

; When phone is in the StandBy screen, pressing key '0' opens the default browser.

; With this patch, you can open any other application.

; You need to know its UID. Then, swap bytes to little-indian to get xxDIUxxx. In other words: 0x12345678 becomes 78563412

; For example:

; FExplorer UID = 0xE00012DF therefore xxDIUxxx=DF1200E0

; Calculator UID = 0x10005902 therefore xxDIUxxx=02590010

; OperaMini UID = 0x101D3166 therefore xxDIUxxx=66311D10 In this case, be aware that it takes some time (5 seconds) to open.

;

; then, the patch becomes:

; SnR:sys\bin\phone.exe:398D00100000000000000000:xxDIUxxx0000000000000000

; SnR:sys\bin\phone.exe:398D00100100000035000000:xxDIUxxx0100000035000000

; As far as I know, nothing is broken. But I decline all responsability, of course.

; Anyway, here it is. Enjoy

; end of ChangeBrowserOnKey0

SnR:sys\bin\phone.exe:398D00100000000000000000:5a0100200000000000000000

SnR:sys\bin\phone.exe:398D00100100000035000000:5a0100200100000035000000

Modificato da Davyd84
Link to comment
Condividi su altri siti

  • 1 mese dopo...

ciao ragazzi..anche io ci ho rovato..ma niente..su roopatcher tutto ok creocietta verde con autorun...

ma quando tengo premuto il tasto "0" mi apre quello di default....

non so dove sbaglio...

premetto che uso opera mini 4.2 la versione ufficiale...

ho un n958gb ed il mio UID è : 10190b17

se qualcuno mi potrebbe dare una mano.. ne sarei :)

questo è l'edit del file:

; *** ChangeBrowserOnKey0 1.0 ***

; *** Change Browser On Key '0' ***

; Author: fca00000 , fca00000-at-yahoo-dot-es

; Date: 2008.06.01

; Firmware: tested on N80 v 5.0719.02 . Might work on preFP1+FP1

;

; When phone is in the StandBy screen, pressing key '0' opens the default browser.

; With this patch, you can open any other application.

; You need to know its UID. Then, swap bytes to little-indian to get xxDIUxxx. In other words: 0x12345678 becomes 78563412

; For example:

; FExplorer UID = 0xE00012DF therefore xxDIUxxx=DF1200E0

; Calculator UID = 0x10005902 therefore xxDIUxxx=02590010

; OperaMini UID = 0x101D3166 therefore xxDIUxxx=66311D10 In this case, be aware that it takes some time (5 seconds) to open.

;

; then, the patch becomes:

; SnR:sys\bin\phone.exe:398D00100000000000000000:xxDIUxxx0000000000000000

; SnR:sys\bin\phone.exe:398D00100100000035000000:xxDIUxxx0100000035000000

; As far as I know, nothing is broken. But I decline all responsability, of course.

; Anyway, here it is. Enjoy

; end of ChangeBrowserOnKey0

SnR:sys\bin\phone.exe:398D00100000000000000000:10190b170000000000000000

SnR:sys\bin\phone.exe:398D00100100000035000000:10190b170100000035000000

ciao grazie!!!

Link to comment
Condividi su altri siti

  • 3 mesi dopo...

Questa patch con i nuovi firmware non funziona più. Per chi è interessato posto questo modo scoperto da un certo "piskor".

Copiate Z:\private\10202be9\101F8783.txt sul PC

Apritelo e andate alla linea

0x6 int 268471609 0 cap_rd=alwayspass cap_wr=alwaysfail

a questo punto basterà inserire al posto di 268471609 l'UID dell'applicazione che si desidera mettere al tasto 0

ES: per x-plore (il quale UID è 0xA0000BCD)

0x6 int 0xA0000BCD 0 cap_rd=alwayspass cap_wr=alwaysfail

Salvate in unicode, trasferite al telefono e salvate in C:\private\10202be9\

Ciaoooo

Link to comment
Condividi su altri siti

Questa patch con i nuovi firmware non funziona più. Per chi è interessato posto questo modo scoperto da un certo "piskor".

Copiate Z:\private\10202be9\101F8783.txt sul PC

Apritelo e andate alla linea

0x6 int 268471609 0 cap_rd=alwayspass cap_wr=alwaysfail

a questo punto basterà inserire al posto di 268471609 l'UID dell'applicazione che si desidera mettere al tasto 0

ES: per x-plore (il quale UID è 0xA0000BCD)

0x6 int 0xA0000BCD 0 cap_rd=alwayspass cap_wr=alwaysfail

Salvate in unicode, trasferite al telefono e salvate in C:\private\10202be9\

Ciaoooo

Qualcuno ha provato se funziona? Così magari lo scriviamo meglio :mumble:

Link to comment
Condividi su altri siti

  • 2 settimane dopo...
  • 2 mesi dopo...
  • 2 settimane dopo...
  • 1 mese dopo...
Provato ma non funziona. E66 come telefono...

... Ritratto tutto, funziona anche su E66 ultimo firmware.

L'unico appunto è che NON bisogna mettere il valore 0X10... ma l'UID modificato.

Quindi, se si usa quest'ultimo metodo (quello di prima non mi funzionava), è anche possibile non installare la PATCH ChangeBrowserOnKey0

Modificato da chigiotti
Link to comment
Condividi su altri siti

Please sign in to comment

You will be able to leave a comment after signing in



Accedi Ora
 Share


×
×
  • Crea Nuovo...

Informazione Importante

Questo sito utilizza i cookie per analisi, contenuti personalizzati e pubblicità. Continuando la navigazione, accetti l'utilizzo dei cookie da parte nostra | Privacy Policy